
NBRE-1000 Rotary Evaporator 10L Brief introduction : Rotary evaporator use stepless speed to make the glass rotating bottle constant rotation, the material in the bottle wall to form a large area of uniform film, and then through the intell
NBRE-1000 Rotary Evaporator 10L
Brief introduction of Rotary evaporator:
Rotary evaporator use stepless speed to make the glass rotating bottle constant rotation, the material in
the bottle wall to form a large area of uniform film, and then through the intelligent constant temperature
water bath heat the rotating bottle uniformly, high-speed evaporation under vacuum case, after the efficient
glass condenser cooling, the solvent vapor will recycle in the collection bottle.
Features of Rotary evaporator:
• The main bracket is made of stainless steel and aluminum alloy with reasonable structure and materials.
• All glass components are borosilicate glass (GG-17), high temperature, anti-corrosion.
• Sealing system adopts imported fluorine rubber and Teflon two-way combination seal, long corrosion-resistant life,
to maintain a high degree of vacuum.
• Vacuum gauges show real-time vacuum, oil-based table with anti-vibration characteristics.
• Upright three-layer serpentine coil condenser, main cooler + double cooler, ensuring high recovery.
• Continuous feeding for customer's convenience, valve type feeding valve socket PTFE tube.
• Collecting bottles are equipped with dropping materials to facilitate the collection and discharge of evaporated extracts.
• Check valve control, continuous discharge, the machine in working condition, the vacuum switch.
• All valves use the latest integrated hand wheel valve, sealing is good, the operation is more simple and convenient
Microprocessor-based power switch control.
• LCD full screen display, temperature, speed dual digital display, bath thermostat intelligent control, PT100-type sensor,
quickly and accurately transfer temperature.
• Brushless DC motor, stable rotation, no spark, slow down by force.
• Bath electric lift, lift part of the deceleration by force motor, lifting process more stable.
• The pot is made of high-quality 304 stainless steel, corrosion-resistant and durable. The outer layer of the pot is covered
with a silicone layer, which makes it safer to use at high temperature.
• Over-temperature protection function, when the actual temperature exceeds the set temperature of 5 ℃, the machine will
automatically power-off heating.
• Anti-dry function, the heating pot lower than the heating pipe, the machine will automatically power off.
• If there is a sudden power failure while the machine is working, the machine will stop heating automatically when the power
is turned on again.
Details of Rotary evaporator:
Power supply |
220V/50HZ (various power supply and plug can be customized) |
Rotating motor power |
60W |
Lifting motor power |
40W |
Heating power |
4.5KW |
Vacuum degree |
0.098Mpa |
Rotating flask capacity |
10000ml Φ280mm/Φ95mm flange mouth |
Collecting flask capacity |
5000ml Φ230mm/Φ50mm flange mouth |
Rotating speed |
0-120rpm/min |
Temperature controlling range |
0-400℃ |
Temperature controlling accuracy |
±1℃ |
Glass temperature range |
-80-250℃ |
Lifting stroke |
0-180(mm) |
Condenser size |
MainΦ130×640H(mm) DeputyΦ130×410H(mm) |
Feed valve |
Φ35 flange mouth |
Release valve |
Φ35 flange mouth*2pcs |
Discharge valve |
¢10mmglass and lean discharge port |
Bath size/volume |
Φ350×220H(mm) about21L |
Dimension |
1100*400*1900(mm) |
Packing size |
1070L×520W×1210H(mm) about0.67m3 |
Gross weight |
95KG |
More pictures
* Rotary evaporator price for lab concentration experiment
Welcome to the official website of the Nanbei Group *